Matheson Library Search for 'se,phr:"Construction Industry Research and Information Association:"'

Guide to international organisations of interest to the construction industry

By Armitage, J. S.. London Construction Industry Research and Information Association 1982 . 114 p. 21cm.

Place Hold on Guide to international organisations of interest to the construction industry

Measuring flow in open channels

By Charlton, F. G.. London Construction Industry Research and Information Association 1978 . 160p.

Place Hold on Measuring flow in open channels

Cost-effective sewerage treatment:

London Construction Industry Research and Information Association 1975 . 103p.

Place Hold on Cost-effective sewerage treatment:

Study of an experimental spiral storm overflow for sewage

By Prus-Chacinski, T. M.. London Construction Industry Research and Information Association 1976 . 21 leaves, [9] leaves of plates

Place Hold on Study of an experimental spiral storm overflow for sewage

Review of field and laboratory tests on riprap

By Pitt, J. D.. London Construction Industry Research and Information Association 1982 . 22p.

Place Hold on Review of field and laboratory tests on riprap

Welded plate girders

By Braithwaite, A. B. M.. London Construction Industry Research and Information Association 1970 . 23 leaves

Place Hold on Welded plate girders

A mathematical model of the structure of strong winds

By Deaves, D. M.. London Construction Industry Research and Information Association 1978 . 49p.

Place Hold on A mathematical model of the structure of strong winds

Cost-effective sewage treatment

London Construction Industry Research and Information Association 1973 . 2 v. ;

Place Hold on Cost-effective sewage treatment

Web buckling of rolled steel beams

By Holmes, M. (. London Construction Industry Research and Information Association 1980 . 20p.

Place Hold on Web buckling of rolled steel beams

Guide to design of storage ponds for flood control in partlyurbanised catchment areas

By Hall, M. J.. London Construction Industry Research and Information Association 1980 . 103p., [43]p. of plates

Place Hold on Guide to design of storage ponds for flood control in partlyurbanised catchment areas

Lack of fit in steel structures

By Mann, A. P.. London Construction Industry Research and Information Association 1981 . 64p.

Place Hold on Lack of fit in steel structures

Fatigue tests in large butt welds

By Harrison, J. D.. London Construction Industry Research and Information Association 1970 . 19 leaves

Place Hold on Fatigue tests in large butt welds

Friction losses during prestressing

By Owens, A.. London Construction Industry Research and Informatoin Association 1974 . 15 leaves, 13 leaves of plates

Place Hold on Friction losses during prestressing

Development of design criteria for concrete under combined states of stress

By Newman, J. B.. London Construction Industry Research and Information Association 1978 . 52p., 40p. of plates

Place Hold on Development of design criteria for concrete under combined states of stress

Moment-rotation characteristics of restrained reinforced concrete beams, including effects of axial tension

By Pannell, F. N.. London Construction Industry Research And Infomation Association 1971 . 32 leaves

Place Hold on Moment-rotation characteristics of restrained reinforced concrete beams, including effects of axial tension

Control and suppression of pressure surges in pipelines and tunnels

By Thorley, A.R.D.. London construction Industry Research and Information Association 1979 . 112 p

Place Hold on Control and suppression of pressure surges in pipelines and tunnels

Design of riprap slope protection against wind waves

By Thompson, D. M.. London Construction Industry Research and Information Association 1976 . 66 p.

Place Hold on Design of riprap slope protection against wind waves

A guide to the use of grass in hydraulic engineering practice

By Whitehead, E.. London Construction Industry Research and Information Association 1976 . 113 p., [4] pages of plates

Place Hold on A guide to the use of grass in hydraulic engineering practice

Hydraulic roughness of segmentally lined tunnels

By Pitt, J. D.. London Construction Industry Researh and Information Association 1982 . 30 p.

Place Hold on Hydraulic roughness of segmentally lined tunnels

Full scale tests to determine the hydraulic performance of a lined-invert rock tunnel

By Wright, David Ellis. London Construction Industry Research and Information Association 1971 . [1], 48 p. 30cm.

Place Hold on Full scale tests to determine the hydraulic performance of a lined-invert rock tunnel

The analysis, design and modification of pipe networks

By Markland, E.. London Construction Industry Research and Information Association 1975 . 1v. in various pagings

Place Hold on The analysis, design and modification of pipe networks

A review of pore pressure and internal uplift in massive concrete dams

By Moffat, A.I.B.. London Construction Industry Research and Information Association . 31 leaves

Place Hold on A review of pore pressure and internal uplift in massive concrete dams

Concrete-filled tubular steel columns

By Ser, H. K.. London Construction Industry Research and Information Association 1972 . 57 leaves

Place Hold on Concrete-filled tubular steel columns

Recommended tunnel sizes

London Construction Industry Research and Information Association 1977 . 44 p.

Place Hold on Recommended tunnel sizes

Design of spillways for re-aeration of polluted waters

By Essery, I.T.S.. London Construction Industry Research and Information Association 1978 . 36 p

Place Hold on Design of spillways for re-aeration of polluted waters

The hydraulic design of stepped spillways

By Essery, I.T.S.. London Construction Industry Research and Information Association 1978 . 45 p

Place Hold on The hydraulic design of stepped spillways

The reliability of reinforced concrete floor slabs in office buildings

By Baker, M.J.. London Construction Industry Research and Information Association 1976 . 74 p

Place Hold on The reliability of reinforced concrete floor slabs in office buildings

Variability in the strength of structural steel

By Baker, M.J.. London Construction Industry Research and Information Association 1972 . 2 v.

Place Hold on Variability in the strength of structural steel

Axially loaded steel columns

By Young, B.W.. London Construction Industry Research and Information Association 1971 . iv, 69 leaves

Place Hold on Axially loaded steel columns

Early-age thermal crack control in concrete

By Harrison, T.A.. London Construction Industry Research and Information Association 1981 . 48 p.

Place Hold on Early-age thermal crack control in concrete

Rectangular composite columns

By Basu, A.K.. London: Construction Industry Research and Information Association 1969 . 31 p., 20p. of plates

Place Hold on Rectangular composite columns

Design for movement in buildings

By Alexander, S.J.. London : Construction Industry Research and Information Association, 1981 . 54 p 0860171698

Place Hold on Design for movement in buildings

Riprap design for wind-wave attack

London Construction Industry Research and Information Association 1980 . 109 p., 48 p. of plates

Place Hold on Riprap design for wind-wave attack

Effective use of epoxy and polyester resins in civil engineering structures

By Tabor, L. J.. London Construction Industry Research and Information Association 1978 . 70 p.

Place Hold on Effective use of epoxy and polyester resins in civil engineering structures

Flexibility coefficients for the design of piles and pile groups /

By Butterfield, R. London : Construction Industry Research and Information Association, 1981 . 79p. 086017171X

Place Hold on Flexibility coefficients for the design of piles and pile groups /

Load distribution in concrete bridge decks

By Cusens, A. R.. London Construction Industry Research and Information Association 1974 . 37 leaves

Place Hold on Load distribution in concrete bridge decks

Local strength of flat slabs at column heads

By Stamenkovic, A.. London Construction Industry Research and Information Association 1972 . 81 leaves

Place Hold on Local strength of flat slabs at column heads

Application of finite strip method to the analysis of simply-supported bridge deck structures with elastic intermediate column supports

By Loo, Yew-Chaye. Dundee Department of Civil Engineering, University of Dundee 1970 . 101 leaves , Report prepared for the Construction Industry Research and Information Assoication

Place Hold on Application of finite strip method to the analysis of simply-supported bridge deck structures with elastic intermediate column supports

Design rules for steel columns and beams

By Young, B.W.. London Construction Industry Research and Information Association 1971 . v, 72 leaves

Place Hold on Design rules for steel columns and beams

Residual stresses and their effect on the moment-curvature properties of structural steel sections

By Young, B.W.. London: Construction Industry Research and Information Association, 1971 . v, 144 leaves: 30 cm..

Place Hold on Residual stresses and their effect on the moment-curvature properties of structural steel sections

Design of steel columns and beams

By Young, B.W.. London Construction Industry Research and Information Association 1971 . vi, 101 leaves

Place Hold on Design of steel columns and beams

Composite beams and slabs with profiled steel sheeting

By Lawson, R.M.. London Construction Industry Research and Information Association 1983 . 48 p.

Place Hold on Composite beams and slabs with profiled steel sheeting

Management contracting

London Construction Industry Research and Information Association 1983 . 44 p

Place Hold on Management contracting

A guide to the use of rock reinforcement in underground excavations

By Douglas, T.H.. London Construction Industry Research and Information Association 1983 . 74 p.

Place Hold on A guide to the use of rock reinforcement in underground excavations

Material durability in aggressive ground

By Barry, D.L.. London Construction Industry Research and Information Association 1983 . 60 p.

Place Hold on Material durability in aggressive ground

Settlement of structures on clay soils

By Padfield, C. J.. London Construction Industry Research and Information Association 1983 . 132 p

Place Hold on Settlement of structures on clay soils

A suggested design procedure for accuracy in building.

London : Construction Industry Research and Information Association, 1983 . 56 p. : 29 cm..

Place Hold on A suggested design procedure for accuracy in building.

Manual for material benefit :

London : CIRIA, 1983 . iv, 31p. 0860172031

Place Hold on Manual for material benefit :

Sewage treatment optimisation model :

London Water Research Centre in collaboration with Construction Industry Research and Information Association 1981 . 264 p.

Place Hold on Sewage treatment optimisation model :

A Client's guide to management contract in building /

London : CIRIA, 1984 . 12p. 0860172252

Place Hold on A Client's guide to management contract in building /